ยี่ห้อ
 
หมวดสินค้า
 
50 สินค้าคนดูมากสุด
 
แท็กสินค้า
Test Plug 2 Poles (ไต้หวัน) Test Plug 2 Poles (โครเน่) อาร์เรสเตอร์ 3 โพล (พร้อม Failed Test Plug 4 Poles (โครเน่) โมดูลาร์ อแด็ปเตอร์ 1:2 (6P4C) แม็กกาซีน สำหรับ อาร์เรสเตอร์ 3 บ๊อกพักสายโทรศัพท์ขนาด 30 คู่สาย ขาสแตนเลส 1 ขา (ความลึก 22 มม.) Disconnection Module อุปกรณ์เชื่อมต่อพักสายโทรศัพท์ ดิสคอนเน็คชั่น โมดูล 2/10 (โครเน เครื่องมือเข้าสายโทรศัพท์ (ไต้หว Test Plug 4 Poles (ไต้หวัน) โมดูลาร์ อแด๊ปเตอร์ ตัวเมีย 1:2 โมดูลาร์ อแด็ปเตอร์ 1:3 (6P4C) สายโทรศัพท์แบน 4 คอร์ (100 เมตร คอนเน็คชั่น โมดูล 2/10 (แบบโปรไฟ ดีสคอนเนคเตอร์ คอนเน็คชั่น โมดูล 2/10 (โครเน่) ลาเบล โฮลเดอร์ 2/10 เครื่องมือเข้าสายโทรศัพท์ โครเน่ โมดูลาร์ บ๊อก (ขนาดใหญ่) 6P4C ดิสคอนเน็คชั่น โมดูล 2/10 (แบบโป สายครอสโทรศัพท์ (ขาว - แดง) ขนาด โมดูลาร์ บ๊อก (ขนาดกลาง) 6P4C
 
อัตราแลกเปลี่ยน
 
สถิติ

เริ่ม :25 กย. 2553
 
ตะกร้าสินค้า
0 รายการ
 
นาฬิกา
 
สินค้าของเรา
Pipe Fastener
Pipe Fastener
LI-PPFN
0.00 บาท
 
ไปรษณีย์ไทย
 
สินค้าน่าสนใจ
 
DBD Registered

 

CCTV / MATV CABLE RG-11 TYPE C-RG11-S60

CCTV / MATV CABLE RG-11 TYPE C-RG11-S60
กดเพื่อขยายขนาด
ราคา: 0.00 บาท
สถานะสินค้า: สั่งของก่อน
โมเดล: C-RG11-S60
ความนิยมเฉลี่ย: ยังไม่มีอัตราความนิยม

จำนวน: หยิบใส่ตะกร้า
(สินค้านี้ปริมาณต่ำสุดที่ 100)

   รายละเอียดสินค้า ( Product Detail )


รหัสสินค้า (Product ID): C-RG11-S60

คำอธิบายอย่างย่อ: RG-11 Type

จำนวนบรรจุ ต่อหน่วย: 1  m.

ราคาปกติ ต่อหน่วย:  Call

                

ข้อกำหนด คุณลักษณะของสินค้า (Specification):

Shield Type: Std
Product Description:
Bonded foil, 60% braid, PVC jacket 
Application:
RG 11 drop cable suitable for CATV/MATV, Broadband, 
HDTV and Satellite Broadcasting Transmission use.
RG 11 can be used as a trunk cable

Standard Construction:
14 AWG [1.63 mm (0.064 in)] copper covered steel 
center conductor, gas expanded polyethylene dielectric,
inner shield aluminum-polypropylene-aluminium laminated
tape with overlap bonded to dielectric, outer shield of
34 AWG (0.16 mm) bare aluminum braid wire, jacket of
black PVC (LSZH optional) Nominal outside diameter is
10.03mm (0.395 in.) Messenger Breaking Strength (min)
is 166 kgf
.
Physical Dimensions:

Attenuation at 20°C (68°F):


Electrical Property:
Nominal Impedance: 75Ω
Nominal Velocity of Propagation: 85%

Tip
Messenger Wire Separation
The force required to separate the messenger section 
of the cable from the coaxial section shall be a minimum 
of 3 pounds (13.3N) and a maximum of 15 pounds (66.7N) 
when tested in accordance with ANSI/SCTE 61.
When separating co-joined members, i.e. messengered,
dual or Siamese type cables in the filed, it is recommended
that the separation be performed using a shearing method 
as opposed to a tearing action. Start the separation with 
a knife or diagonal cutters. The shear method will help to 
prevent jacket splitting and tearing on either side of the 
web. (Follow standard ANSI/SCTE 61 2002)

 

ยอดสั่งซื้อขั้นต่ำ 100 เมตร

เขียนความคิดเห็น
ชื่อ:


ความคิดเห็น: คำแนะนำ: HTML จะไม่ถูกแปลง!

ความนิยม: แย่            ดี

ป้อนรหัสในกล่องข้างล่างนี้:

ไม่มีรูปภาพเพิ่มเติมสำหรับสินค้านี้